jarsoftelectrical.com

Upgrade ready for FREE download: 
Upgrade to VERSION 5.06
(for Cable-Mate FULL version only).
 
version info:
- Added 1st Amendments, Added Ring final circuit cable calculations,
 please read the Installation instructions below for more information.
Corrected  file save error.
-Some small and/or invisible improvements

This latest version has a new licence system, this is to help illiminate a lot of copied software which is being used, every computer will need a new seperate registration licence key, because of this your existing registration key will no longer work on this version. Please read the installation instructions below for more details. Once installed, registered and fully working you will have to Un-install the old version.

Click here to download Upgrade

Installation instructions: PLEASE READ - important information.

.

NOTE:
Cable-Mate is available via this web site and -
via  www.ebay.co.uk -  for sale by jason_leeds only,

I keep a list of all buyers and their e-mail addresses, if i did not sell it then sorry it will not be upgradeable.....
Note: Users of copied software will never be supported for upgrades,

I reserve the right to refuse to give existing customers a new licence for this new version if they have been distributing copies of the old version.


Click here to buy a copy via this web site.

Please come back and check for new versions regularly, all upgrades are FREE.

Last updated - 12th Dec 2011

Follow Cable-Mate on 

---

Work in Progress: click here to see which ideas I am currently working on and what stage they are at.

Cable-Mate Version History:

version 5.06
- Added 1st amendments, Added ring final cable size calculations,
-Some small and/or invisible improvements, corrected file save error.

version 5.05
- Added 1st amendments, Added ring final cable size calculations,
-Some small and/or invisible improvements

version 5.04 BETA TEST version
- A BETA test version which has been completely rewritten using a different software package, it has been tested but needs some more testing before it will be officially released.
Please only use it for helping test the software and not for your official calculations. It will install along side the existing version, you will have two desktop icons.
-Some small and/or invisible improvements

version 4.60
- Added Three phase boards to the Board Layout Creator, also changed the way you create a board, please read the HELP instructions within the program.
-Some small and/or invisible improvements

version 4.50
- Added a new program with the ability to calculate voltdrop based on measured R1+R2 readings to comply with the Test and Inspection voltdrop check requirements.(for unarmoured cables below 16mm at present)
-Some small and/or invisible improvements

version 4.40
- Added a Board Layout Creator, visually + graphically create your single phase consumer unit and print it off complete with labels, a simple drag and drop operation makes it easy to use, laminate it and it will make a great consumer unit schedule to leave with customers, add it to you test results for a professional finish.
-Some small and/or invisible improvements

version 4.33
- Added PT100 and Thermocouple conversions to the formula page,
-Some small and/or invisible improvements

version 4.32
- Fixed a small reported problem with the Trunking selection,
-Some small and/or invisible improvements

version 4.31
- Fixed a small problem where the program shut down unexpectedly
-Some small and/or invisible improvements

version 4.3
- Added single-core SWA up to 1000mm, increased the current rating of BS88 fuses,
- Improved the Diversity calculation page,
- Added a basic formula page which i will add to in the future.
Done some work around the problem with the printing screen that a couple of users had reported.
-Some small and/or invisible improvements

version 4.2
-Fixed the problem in the Ring main length/resistances screen of r1 and r2 being swapped around that occured in the first few copies of version 4.1
-Added 4mm cable sizes for Ring main length/resistances.
-Some small and/or invisible improvements

version 4.1
-New trunking calculation screen, as well as singlecore cables you can now select
Flex, SWA, Twin and Earth, SY flex, YY flex, CY flex, HO7 RN F flex, Flexisheild, Profibus and CAT 5E cables when calculating trunking sizes.
-Added a screen for Ring main length/resistances, enter either 'R1+R2' or 'r1 and r2' or 'length' to find the other values.
-Several small and/or invisible improvements

version 4.0
-Added CY-flex to 16mm, H07RN F-flex corrected to 60'C (mobile installations) to 25mm
Added 45 amp MCB type B which was missing from list
-Several small and/or invisible improvements

version 3.9
-Improved Motor fuse/MCB selector page, FOR- single phase DOL started motors upto 1.5KW, three phase DOL started motors upto 15KW and three phase Star/Delta started motors upto 90KW, added abilty to calculate motor conductor cable sizes using the protective device as short circuit protection only, in the Cable-Calculation screen, this is for users with a screen resolution of 1024 x 768 or above only at present.

version 3.8
-No version 3.8 - this was used for test purposes

version 3.7
-Fixed a software glitch that ocured in version 3.6

version 3.6
-Added Twin & Earth option in the Check Disconnection time screen.
Added a Motor fuse/MCB selector,
Added minimum Earth CPC for calculated cable size,
Improved SWA cleat and Gland finder, and improved conduit size calculator,
-Several small and/or invisible improvements

version 3.5
-Added the ability to check R1+R2 of SWA using the armouring as a CPC in the Check Disconnection time screen. Added MCCB (merlin gerin and square D up to 400 amp)
Added a Diversity calculator (test version)
-Several small and/or invisible improvements

version 3.4
-Added SY-flex, YY-flex and Flexishield cables to the Cable Calculation screen, added the ability to enter a measured value of R1+R2 in the Check Disconnection time screen.
-Several small and/or invisible improvements

version 3.3
-Added ability to print more of the information/results from other parts of the software,
-Several small and/or invisible improvements

version 3.2
-Added minimum cable bend radius calculator,
-Several small and/or invisible improvements

version 3.1
-Included 80% Zs values for disconnection time calc,
-Several small and/or invisible improvements

version 3.0
-This is the first release to include the 17th edition regs 2008,

version 2.03
-This version included a much better look.
-Several small and/or invisible improvements